C928 Car with roller brush

1. Single-cylinder diesel engine, displacement 532cc, peak power 15 HP. Equipped with a 300W preheating starting device. Different from the dual-engine refitted structure of ATVs, it features lower fuel consumption, quieter operation and lower failure rate.

2. Full-time four-wheel drive system. Fitted with 20*8-10 deep-tread vacuum snow tires with a width over 200mm for outstanding traction. Dual differential gears prevent excessive tire wear during turning.

3. Continuously variable transmission (CVT) with cruise control, adopting original imported American transmission for stable performance. Clutch-free design without separate brake control; a single lever controls forward, acceleration, deceleration, reverse and parking. User-friendly for elderly operators and eliminates clutch and brake malfunctions.

4. Three switchable working modes: Low-speed working mode (0–6km/h); high-speed transfer mode (0–12km/h); neutral power-off mode for short-distance pushing or towing.

5. Output protection device: The roller brush and other working attachments are locked and non-functional under high-speed transfer and neutral power-off modes.

6. Electric power steering for effortless turning control.

7. Digitally controlled heating fan to maintain constant temperature inside the fully enclosed cab.

8. Large 25-liter fuel tank with anti-theft lock, fuel level display installed inside the cab.

9. Emergency stop button to cut power and halt the whole machine with one press in emergencies.

10. 2500-lb electric winch, used to lift and lower roller brush attachments and pull the vehicle out of traps.

11. Comfort configurations: water spray windshield wiper, turn signal lights, 6 high-bright headlights, shock-absorbing seat, dual-speaker audio player and built-in fan.

12. Equipped with 12V 100Ah automotive battery (800CCA, 20hr).

13. Overall dimension: 2500*1300*1980mm, accessible to underground parking garages. Wheelbase 1300mm with compact turning radius. Standard 1m×1.3m extended cargo bucket for transporting supplies and maintenance tools.

14. Sweeping roller width: 150cm, reinforced double-side bearing structure, height adjusted manually via hand crank.

15. Roller rotation speed: 360 rpm.

16. Electric adjustment for left-right tilt angle and lifting height of the roller brush.

Throw snow

Snow throwing width: 120cm

Snow removal thickness (snow bucket height) ≥ 60cm

Bucket body main plate is integrally molded, sturdy and durable

Snow plow

Snow plow width: 150cm, height: 40cm