C928 Car with roller brush

1. Equipped with a twin-cylinder engine easy to start at low temperatures, displacement 739cc and peak power 25 HP. Adopting an original single-engine solution instead of modified dual-engine structures from ATVs, it delivers lower fuel consumption, quieter operation and a lower failure rate.

2. Full-time four-wheel drive system. Fitted with 20*8-10 deep-tread vacuum snow tires over 200mm wide for excellent snow traction. Dual differentials are installed to prevent abnormal tire wear during turns.

3. Continuously Variable Transmission (CVT) with cruise control, equipped with original imported American transmission for stable quality. Clutch-free design without separate brake control. One single lever handles forward, acceleration, deceleration, reverse and parking operations, easy enough for elderly operators, and eliminates malfunctions of clutch and brake assemblies.

4. Three switchable modes: Low-speed working mode (0–6 km/h), high-speed transfer mode (0–12 km/h), neutral power-off mode for short-distance pushing or towing.

5. Built-in output protection device locks the roller brush and other working attachments to stop functioning under high-speed transfer and neutral power-off modes.

6. Electric power steering enables easy and labor-saving turning control.

7. Digitally controlled heating fan works with the fully enclosed cab to maintain a constant internal temperature.

8. Large 25-liter fuel tank with anti-theft lock, and a real-time fuel level display inside the cab.

9. An emergency stop button is available to cut off power and shut down the whole machine with one press in emergencies.

10. A 2500-lb electric winch is fitted, which can lift and lower attachments such as roller brushes and pull the vehicle out of snow traps for self-rescue.

11. Complete comfort accessories: water-spray windshield wiper, turn signal lights, 6 high-bright headlights, shock-absorbing seat, dual-speaker audio player and circulating fan.

12. Configured with a 12V 100Ah automotive battery (800CCA, 20hr rate).

13. Overall dimension: 2500×1300×1980 mm, compatible with underground parking garages. Wheelbase: 1300 mm with a small turning radius. A 1m×1.3m extended cargo bucket is equipped to carry snow removal supplies and maintenance tools.

14. Sweeping roller width: 150 cm, reinforced double-side bearing structure; roller height adjusted manually by hand crank.

15. Roller rotation speed: 360 rpm.

16. Both the left-right tilt angle and lifting height of the roller brush are electrically adjustable.

Throw snow

Snow throwing width: 120cm

Snow removal thickness (snow bucket height) ≥ 60cm

Bucket body main plate is integrally molded, sturdy and durable

Snow plow

Snow plow width: 150cm, height: 40cm